Table of Contents
Advertisement
DMD50 Universal Satellite Modem
TCP/IP (menu)
BOOT MODE
IP ADDR MASK
MODEM IP ADDR
MN-DMD50 Revision 4
{DEFAULT, NON-VOL, BOOTP, IP TEST}
DEFAULT: During initialization (boot up), the modem will restore the web
setting to the standard IP Mask and addresses supplied by the modem. The
modem will be taken off the network and will not be accessible. The Default
settings are:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
BOOTP:
During initialization (boot up), the modem will get the
names, masks, and IP Addresses of the modem, router,
and server.
NON-VOL:
Stores and uses IP Mask and addresses as provided by
the user.
IP TEST: Stores and uses IP Mask and addresses to fixed settings as listed
below.
Bootp Server Tag:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
BOOTp SERVER
Only used if Bootp is selected in Boot Mode. Should be
consistent with the tag expected by the users Bootp Server.
MODEM HOST
{XXX.XXX.XXX.XXX} Hexidecimal Mask
{ddd.ddd.ddd.ddd} Decimal Mask
The IP Address Mask of the local network. The mask is
expressed in a hexadecimal format, and must be a valid TCP/IP
Mask. This field should be set before changes are made to the
Modem or Router Address.
{XXX.XXX.XXX.XXX} Hexidecimal Address
{ddd.ddd.ddd.ddd} Decimal Mask
The IP Address of the modem. This address should be consistent
for the mask defined. This address is expressed in hexadecimal
format. Broadcast and loop back addresses will not be allowed.
These are addresses with all subnet bits set to 0's or 1's.
255.000.000.000
010.000.000.001
010.001.001.001
010.000.001.001
206
255.255.255.000
192.168.0.238
192.168.000.101
192.168.000.102
{128 – 257, default is 206}
The Host Modem for the network.
User Interfaces
(FF.00.00.00 hex)
(C0.A8.00.EE hex)
(0A.01.01.01 hex)
(0A.00.01.01 hex)
(FF.FF.FF.00 hex)
(C0.A8.00.EE)
(C0.A8.00.65)
(C0.A8.00.66)
4–32
Advertisement
Table of Contents
