Table of Contents
Advertisement
DMD50 Universal Satellite Modem
1.2
Configurations
The unit can be configured in the following ways:
Features and options that are installed when the unit is ordered
Feature upgrades
Hardware options that are installed to a unit that is sent to a Comtech facility
Hardware options that the user can install at their own location
1.2.1 Features/Options Installed at Time of Order
Features installed at the time of ordering are the options pre-installed/initialized in the factory
prior to shipment. These can be reviewed from the front panel. Refer to Chapter 4, User
Interfaces, for information on how to view these features. Factory installed options are chassis
and board configurations that are introduced during manufacture.
1.2.2 Feature Upgrades
Feature Upgrades are a simple and quick way of changing the feature set of an installed modem.
Feature upgrades are how most options are implemented. Features may be purchased at any time
by contacting a Comtech Corp. salesperson. Refer to Chapter 4 and Appendix D, for information
on how upgrade features are enabled.
1.2.3 Hardware Options
Hardware options (refer to Appendix A) are purchased parts that can be installed into the unit at
the customer's site. A screwdriver is normally the only tool required. Please contact the
Customer Service Department for information not limited to availability and to shipping costs.
Only authorized service personnel should handle and install optional hardware
options.
1.2.4 Factory Installed Options
Units may also be sent to the factory for hardware option installation. Please contact the
Customer Service Department for information not limited to availability and to shipping costs.
1.3
Function Accessibility
All functions can be accessed with a terminal or personal computer via a serial link for complete
remote monitoring and control capability.
MN-DMD50 Revision 4
Introduction
1–2
Advertisement
Table of Contents
