Appendix B. Front Panel Upgrade Procedure; Introduction; Required Equipment; Upgrade Procedure - Radyne DMD20 Installation And Operation Manual

Appendix B. Front Panel Upgrade
B.1

Introduction

The Universal Satellite Modem offers the ability to perform field upgrades of the modem's feature
set quickly and easily from the front panel. Purchased upgrades will become part of the modems
permanent configuration. Demonstration upgrades will enable the optional features for a 30-day
evaluation period.
B.2

Required Equipment

The Universal Satellite Modem is the only equipment required for this procedure.
B.3

Upgrade Procedure

The following paragraphs describe the procedure for permanently updating the feature set of the
Universal Satellite Modem
1. The following steps allow users to quickly determine from the front panel whether or not
the desired feature(s) are supported by the hardware currently installed in the modem.
a.
b.
c.
d.
e.
f.
g.
h.
i.
The top line identifies the options and the second line identifies the following options
status:
INSTALLED indicates that the option is already available as part of the modems feature
set.
HW & KEY REQ indicates that additional hardware is required to support the option.
Contact your Comtech sales representative for more information regarding the required
hardware upgrade.
MN-DMD20-20LBST Revision 14
From the modem's Main Menu, scroll right to the SYSTEM Menu.
Scroll down.
Scroll right to the HW/FW CONFIG Menu.
Scroll down
Scroll right to the FEATURES Menu.
Scroll down.
Scroll right to the UPGRADE LIST Menu.
Scroll down.
Scroll right through the available list of options.
Procedure
B–1