Appendix I. Efficient Drop And Insert (D&I; Introduction; Prerequisite - Radyne DMD50 Installation And Operation Manual

Appendix I. EFFICIENT DROP AND
I.1

Introduction

The following paragraphs describe the menu structure and procedure for configuring a modem for
Efficient Drop & Insert Mode.
I.2

Prerequisite

In order for a modem to be configured for Efficient Drop & Insert, the modem must have a G.703
Interface card installed and Drop & Insert option must be enabled. If the modem does not have
the required hardware and/or feature set enabled, contact your Radyne sales representative to
order the appropriate hardware and/or feature set upgrade. If the modem has the appropriate
hardware, but the software revision is prior to AY, you will need to download the latest modem
firmware from the Radyne FTP website.
The following menus illustrate how to determine whether or not the modem has the required
hardware and feature set options.
SYSTEM
HW/FW CONFIG
FIRMWARE
F05058-AY 6.1
SYSTEM
HW/FW CONFIG
TERR INTFC BRD
01-AS/4975
SYSTEM
HW/FW CONFIG
FEATURES
UPGRADE LIST
D&I
INSTALLED
ENH ASYNC
INSTALLED
MN-DMD50 Revision 4
INSERT (D&I)
or later required
or later equivalent required
required
optional, required if desired
I–1