Radyne DMD50 Installation And Operation Manual page 130

Universal satellite modem
Hide thumbs Also See for DMD50:
Table of Contents

Advertisement

DMD50 Universal Satellite Modem
RX DVB FRM LOCK {Pass/Fail, Unmasked/Masked}
COMMON (menu)
TERR FPGA CFG
CODEC FPGA CFG {Pass/Fail, Unmasked/Masked}
CODEC DEV CFG
VOLTAGES (menu)
+1.5V RX SUPPLY
+1.5V TX SUPPLY
+3.3V SUPPLY
+5V SUPPLY
+12V SUPPLY
+20V SUPPLY
-12V SUPPLY
MN-DMD50 Revision 4
Indicates that there are more than one in 1000 bits in error in IBS
Mode.
Indicates that the Rx Satellite Data Stream Framing is not DVB.
{Pass/Fail, Unmasked/Masked}
Indicates an Interface Card FPGA configuration failure.
Indicates Turbo Codec Card FPGA configuration failure.
{Pass/Fail, Unmasked/Masked}
Indicates Turbo Codec Card ASIC configuration failure.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the 1.5 Volt Rx power bus
located inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the 1.5 Volt Tx power bus
located inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +3.3 Volt power bus
located inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +5 Volt power bus located
inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +12 Volt power bus located
inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the +20 Volt power bus located
inside the modem.
{Pass/Fail, Unmasked/Masked}
Displays the measured voltage of the -20 Volt power bus located
inside the modem.
User Interfaces
4–26

Advertisement

Table of Contents
loading

Table of Contents