Table of Contents
Advertisement
DMD50 Universal Satellite Modem
BKLT TIMEOUT
KEY CLICK
MENU NAVIGATION
LED TEST
REMOTE CONTROL
TERMINAL (menu)
TYPE
BAUD RATE
REMOTE PORT (menu)
ADDRESS
BAUD RATE
INTERFACE
MN-DMD50 Revision 4
{00 - 99}
Allows the user to enter the length of time (in minutes ) of
keyboard inactivity before the backlight shuts off. 00 = no
timeout.
{ON, OFF}
Allows the user to enable or disable the audible beep each time a
key is pressed. Illegal entries will still cause a beep to be heard.
{STANDARD, FLOATING}
Standard: This setting has a fixed starting point for all sub-
menus.
Floating: Sub-menus are floating, always returning to the last
menu that was accessed.
{ENTER}
Allows user to test all front panel LEDs.
{TERMINAL, COMPUTER}
Allows the user to select between terminal RS-232 control and
remote port M&C RS-232/-485 control.
{VT-100, WYSE50, VIEWPOINT}
Allows the user to select the emulation type.
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600}
Allows the user to enter the terminal baud rate.
{32 - 255}
Allows the user to enter the Remote Port Multidrop Address.
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600}
Allows the user to enter the Remote Port Baud Rate.
{RS-232, RS-485}
Allows the user to enter the Remote Port interface type.
User Interfaces
4–31
Advertisement
Table of Contents
