Radyne DMD50 Installation And Operation Manual page 206

Universal satellite modem
Hide thumbs Also See for DMD50:
Table of Contents

Advertisement

DMD50 Universal Satellite Modem
2. Contact Radyne with the Unit ID and Desired Upgrades. The modem's Unit ID can be
found on the front panel as follows:
a. From the modem's Main Menu, scroll right to the SYSTEM Menu.
b. Scroll down.
c. Scroll right to the HW/FW CONFIG Menu.
d. Scroll down.
e. Scroll right to the FEATURES Menu.
f.
The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed as on the
front panel of the modem as 3 sets of 4 digits in a dot-delineated format as follows:
1 2 3 4 . 1 2 3 4 . 1 2 3 4
Your Radyne sales representative will ask you for this number along with your desired feature
set upgrades when placing your order.
3. Once your order has been processed, you will be issued a 12-digit feature set upgrade
code. This code is only good on the modem for which it was ordered. To enter this code
from the front panel, perform the following:
a. From the modem's Main Menu, scroll right to the SYSTEM Menu.
b. Scroll down.
c. Scroll right to the HW/FW CONFIG Menu.
d. Scroll down.
e. Scroll right to the FEATURES Menu.
f.
The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed on the
front panel of the modem as 3 sets of 4 digits in a dot-delineated format indicated in Step 2. The
second line is the data entry area and is displayed as 3 sets of 4 underscores in a dot-delineated
format.
g. Press <ENTER>. A cursor will begin flashing in the data entry area.
h. Using the numeric keypad, enter your 12-digit upgrade code.
i.
If the code entered is correct, the display will display CODE ACCEPTED, otherwise the
INVALID CODE will be displayed..
Care should be taken to insure that the upgrade code is entered properly. After three
unsuccessful attempts to enter a code, the front panel upgrade and demonstration capability will
be locked out and it will be necessary to cycle power on the modem in order to continue.
IMPORTANT
MN-DMD50 Revision 4
Scroll down
Scroll down.
Press <ENTER>.
Front Panel Upgrade Procedure
B–2

Advertisement

Table of Contents
loading

Table of Contents