Changing The Ship Icon; Changing The Backlight And Contrast; Selecting North Up Or Course Up - Standard Horizon CP500 Owner's Manual

3.1.3

Changing the Ship Icon

The cursor may be changed to any of the following:
1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight SHIP ICON and press [ENT] or move the
ShuttlePoint knob to the right to show the popup window with ship icons.
4. Move the ShuttlePoint knob to select the desired icon and press [ENT] or move the
ShuttlePoint knob to the right to select a new icon.
5. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the
Chart page.
3.1.4

Changing the backlight and contrast

With the GPS Chart Plotter is turned On, briefly press [PWR] to show the backlight and
contrast popup window. Move the ShuttlePoint knob to the left or right to adjust the LCD
backlight intensity or up or down to change the LCD contrast. Press [ENT] to set.
3.1.5

Selecting North Up or Course Up

The default selection is NORTH UP, however you may want the top of the Chart page
oriented so it will always show the area ahead of the direction your vessel is travelling which
is called COURSE UP.
1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
CP500
Icon 1
Icon 2
Icon 3
Icon 4
Icon 5
Figure 3.1.3 - Ship icons
Figure 3.1.4 - Backlight and Contrast adjustment
Figure 3.1.5 - Course Up/North Up menu
Page 25
R