Turning Power On And Off; Changing Ship Icons; Adjusting Cursor Speed; Gps Antenna Connector - Standard Horizon CP150C Owner's Manual

GPS Antenna connector

Power and I/O connector

2.6 TURNING POWER ON AND OFF

Press and hold "PWR" for 1 second to turn on. The chart plotter emits one rapid beep
and the Start-Up pages are displayed.
To turn off, press and hold "PWR" for 3 seconds, a countdown timer will appear on
the screen. If you release "PWR" before the countdown timer reaches zero, the chart
plotter will remain on.

2.7 CHANGING SHIP ICONS

The ships icon can be changed to the following:
To change the icons press "MENU" + GENERAL SETUP + "ENTER" + SHIP ICON
+ "ENTER".

2.8 ADJUSTING CURSOR SPEED

The cursor speed may be changed from moving slowly, medium or fast. The cursor
speed can be controlled on the Chart page and also within the menus. To change the
cursor speed:
Press "MENU" + GENERAL SETUP + "ENTER" + CURSOR SPEED + "ENTER".
GPS Chart 150C
.
Figure 2.6 - Start-Up pages
Figure 2.7 - Ships icons
Page 17