Standard Horizon CP500 Owner's Manual page 15

Hide thumbs Also See for CP500:
Table of Contents

Advertisement

NMEA CONNECTIONS
The CP500 PWR ACC 1 connector is also used to attach NMEA devices such as AIS
Receivers, digital instruments, Personal Computers, autopilots and the optional FF525 (or
FF520) BLACK BOX FISH FINDER.
PIN WIRE COLOR FUNCTION
1
BLACK
Battery Ground
2
RED
Battery Positive
3
GREEN
NMEA Common
*
4
BLUE
Port1 Input
5
BROWN
Port1 Output
6
GRAY
Port2 Input
7
WHITE
Port2 Output
8
**
YELLOW
Port3 Output
Switch
-
+
BATTERY
AIS Receiver
PC
Pilot
*
NOTE: AIS RECEIVER OPTION (for more information on AIS refer to Section 14)
When an optional AIS receiver is connected, Port1 of the NMEA In/Out Connections menu
must be changed to AIS 38400 as shown below for communications. When AIS 38400 is
selected the Output Port is disabled.
1. From the Chart page, press [MENU]. Move the ShuttlePoint knob to highlight SETUP
MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press [ENT] or
move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight PORT1 INPUT and press [ENT] or move the
ShuttlePoint knob to the right.
Page 16
CONNECTION EXAMPLE
Common (ground) for NMEA devices
Connect to Output of NMEA device
Connect to Input of NMEA device. Default is NMEA-0183 with GLL, RMB, RMC and XTE sentences
Connect to Output of NMEA device
Connect to Input of NMEA device. Default is NMEA-0183 with GLL, RMB, RMC and XTE sentences
Connect to Input of NMEA device Default is NMEA-0183 with APA, APB, XTE, COG and BOD sentences
Fuse
Transducer
Red
Black
Green
NMEA Common
Blue
Port1 Input
Brown
Port1 Output
Gray
Port2 Input
White
Port2 Output
Yellow
Port3 Output
Note:
Gray and White wires should not be connected to other devices
when the FF525 is connected.
GPS ANT
PWR & ACC 1
ACC 2
VIDEO OUT
VIDEO IN 1
NOTE:
The Tee cable is supplied with
the FF525. If the F 525 is not
connected, plug the Accessory
cable directly into the
PWR ACC 1 connector.
PWR ACC 1 Cable
R
VIDEO IN 2
F
CP500

Advertisement

Table of Contents
loading

Table of Contents