Standard Horizon CP500 Owner's Manual page 4

- The GPS Chart Plotter is designed for maritime use. To avoid water intrusion
ensure the C-MAP B
- Extensive exposure to heat may result in damage to the GPS Chart Plotter.
- The GPS Chart Plotter contains dangerous high voltage circuits which only
experienced technicians can handle.
- STANDARD HORIZON will not be liable for errors contained herein, or for
incidental or consequential damages in connection with the performance or use
of this material.
CLEANING PROCEDURE FOR THE GPS CHART PLOTTER SCREEN
Cleaning of the GPS Chart Plotter screen is a very important operation and must be
done carefully. Since the surface is covered by a antireflective coating, the
procedure for cleaning all the surfaces can be performed using the following
procedure: you need a tissue or lens tissue and a cleaning spray (Windex)
containing Isopropanol (a normal spray cleaner sold for the PC screen, for example
PolaClear by Polaroid). Fold the tissue or lens tissue into a triangular shape,
moisten the tip and use the index finger behind a corner to move the tissue across
the surface, in overlapping side to side strokes. If the tissue is too wet, a noticeable
wet film will be left in its path and you will need to repeat the process. If too dry, the
tissue won't glide easily, and may damage the surface.
CP500
CAUTION
J C-CARD door is completely closed.
Y EPPESEN
Page 5
R