Installing and removing PowerEdge FX2/
FX2s enclosure components
This section provides information on installing and removing the enclosure components. For information
on removing and installing the sled components, see the relevant sled Owner's Manual at Dell.com/
poweredgemanuals.
Customer and field replaceable units—PowerEdge FX2/
FX2s
The following components are customer replaceable units (CRUs):
•
Sleds
•
CMC module
•
I/O module(s)
•
PCIe modules
•
Expansion cards
•
Power supply units
•
Cooling fans
The following components are field replaceable units (FRUs). Removal and installation procedures should
be performed only by Dell certified service technicians.
•
Cooling-fan cage
•
PCIe switch board (PowerEdge FX2s)
•
Fan interface board (PowerEdge FX2)
•
Interposer module(s)
•
Midplane assembly
•
Control panel
•
KVM panel
Safety instructions
WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not
attempt to lift the system by yourself.
WARNING: Opening or removing the system cover when the system is on may expose you to a
risk of electric shock.
WARNING: Exercise care when removing or installing components when the system is on, to
avoid the risk of electric shock.
36
4