Figure 14. Cooling fan indicators
1.
status indicator
Configuration wizard
The Chassis Management Controller (CMC) is pre-configured to use a static IP address. To use Dynamic
Host Configuration Protocol (DHCP):
1.
Access the Chassis Management Controller (CMC).
2.
Click Network.
3.
Click IPv4 or IPv6.
4.
Select DHCP Enable.
For more information, see the Dell PowerEdge FX2/FX2s CMC User's Guide at Dell.com/esmmanuals.
System messages
The CMC web interface displays system messages to notify you of possible problems related to the
enclosure and to the sleds in the enclosure. For a detailed listing of these error messages, including
possible causes and solutions, see the Dell Event and Error Messages Reference Guide at Dell.com/
openmanagemanuals → OpenManage software.
20