Installing A Compute Sled - Dell PowerEdge FX2 Owner's Manual

Figure 32. Removing and installing a compute sled
1. enclosure
3. compute sled handle
Next steps
Install the compute sled or sled blank.
Related Tasks

Installing a compute sled

Installing a compute sled
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Ensure that you read the
Steps
1. If you are installing a new compute sled, remove the plastic cover from the I/O connector(s) and
save for future use.
2. Press the release button on the sled handle to the open position.
40
Safety instructions.
2. compute sled
4. release button on sled handle