Installing the cooling-fan cage
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: This is a field replaceable unit (FRU). Removal and installation procedures must be performed
only by Dell certified service technicians.
1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Remove the cooling-fan cage.
NOTE: You must remove the cooling-fan cage to service other components inside the system.
Steps
1.
Lower the cooling-fan cage into the system.
NOTE: Ensure that there are no cables in the way when placing the cooling-fan cage into the
system.
2.
Tighten the screws until the cooling-fan cage engages with the system.
Next steps
1.
Install the cooling fans.
2.
Install the system cover.
3.
Follow the procedure listed in
Related Tasks
Installing a cooling fan
Installing the system cover
PCIe switch board
The PCIe switch board is supported on the PowerEdge FX2s enclosure. The following procedure is
applicable to the PowerEdge FX2s enclosure.
Removing the PCIe switch board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: This is a field replaceable unit (FRU). Removal and installation procedures must be performed
only by Dell certified service technicians.
60
Safety
instructions.
Before working inside your
After working inside your
system.
system.