Power Specifications - Dell PowerEdge FX2 Owner's Manual

Compute sleds Specifications
Up to four PowerEdge FC430 compute sleds mixed with up to two PowerEdge
FC630 compute sleds, or
One PowerEdge FC830 compute sled mixed with up to two PowerEdge FC630
compute sleds
Storage sleds Specifications
PowerEdge FX2s
Up to three PowerEdge FD332 storage sleds mapped to one PowerEdge FC630
compute sled, or
Up to two PowerEdge FD332 storage sleds mapped to two PowerEdge FC630
compute sleds, or
Up to two PowerEdge FD332 storage sleds mapped to up to four PowerEdge
FC430 compute sleds, or
Up to two PowerEdge FD332 storage sleds mapped to one PowerEdge FC830
compute sled
NOTE: For more information on the technical specifications for the compute and storage sled(s),
see the relevant sled Owner's Manual at Dell.com/poweredgemanuals.
NOTE: For information on mapping of storage sleds to compute sleds in the PowerEdge FX2s
enclosure, see the Dell PowerEdge FD332 Owner's Manual at Dell.com/poweredgemanuals.

Power specifications

Power supply Specifications
unit
Wattage 1100 W (1050 W for low line)
1600 W (800 W for low line)
2000 W (1000 W for low line)
Connector Card Edge
Heat dissipation 394 BTU/hr (full load for the power supply unit only) (1100 W power supply unit)
475 BTU/hr (full load for the power supply unit only) (1600 W power supply unit)
635 BTU/hr (full load for the power supply unit only) (2000 W power supply unit)
Maximum inrush 25 A
current
System voltage 100 – 240 V AC
requirements
92
NOTE: This system is also designed to be connected to IT power systems with
a phase to phase voltage not exceeding 230 V.