Dell PowerEdge FX2 Owner's Manual page 77

Figure 60. Routing of the KVM and control panel cables on the midplane
1. KVM cable connector
3. brackets on the midplane assembly to
route the KVM cable
5. brackets on the midplane assembly to
route the control panel cable
7. connector on the midplane
14. Lift the midplane assembly out of the system.
Next steps
1. Install the midplane assembly.
Related Tasks
Installing the midplane assembly
Removing a compute sled
Removing a storage sled
Removing a power supply unit
Removing the CMC module
Removing an I/O module
Removing the system cover
Removing a cooling fan
Removing the cooling-fan cage
Removing a PCIe module
Removing the PCIe switch board
Removing the fan interface board
2. KVM cable
4. control panel cable
6. control panel cable connector
77