Installing Enclosure Components; Recommended Tools; Front Bezel (Optional); Removing The Front Bezel - Dell PowerVault E03J Series Hardware Owner's Manual

Installing Enclosure Components

Recommended Tools

You may need the following items to perform the procedures in this section:
• Key to the system keylock
• #2 Phillips screwdriver
• Wrist grounding strap

Front Bezel (Optional)

Removing the Front Bezel

1 Using the system key, unlock the front bezel (if locked).
2 Lift up the release latch next to the keylock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from
the system.
Installing Enclosure Components
27