Cmc Module; Removing The Cmc Module - Dell PowerEdge FX2 Owner's Manual

CMC module

Your system supports a hot-swappable CMC module that provides multiple systems management
functions.

Removing the CMC module

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the CMC module to replace a faulty module or service other components
inside the system.
NOTE: The CMC module is hot-swappable.
Ensure that you read the
Steps
1. Disconnect the cables attached to the CMC module.
2. Press the release latch and slide the CMC module out of the enclosure.
Figure 37. Removing and installing the CMC module
1. CMC module
3. release latch
Next steps
Install the CMC module.
Related Tasks
Installing the CMC module
46
Safety instructions.
2. CMC module handle