Snmp; Snmp V1/V2C - Xerox ColorQube 8580 System Administrator Manual

SNMP

Simple Network Management Protocol (SNMP) is a set of network protocols designed to allow you to
manage and monitor devices on your network.
You can use the SNMP configuration pages in CentreWare Internet Services to:
• Enable or disable Authentication Failure Generic Traps.
• Enable SNMPv3 to create an encrypted channel for secure printer management.
• Assign privacy, authentication protocols, and keys to Administrative and key user accounts.
• Assign read and write access to User accounts.
• Limit SNMP access to the printer using hosts.

SNMP v1/v2c

SNMP version 1 (SNMPv1) is the initial implementation of the SNMP protocol. SNMPv1 operates over
protocols such as User Datagram Protocol (UDP), IP, and Novell Internet Packet Exchange (IPX).
SNMPv2c includes improvements in performance, confidentiality, and manager-to-manager
communications over SNMPv1, however it uses the simple-community based security scheme of
SNMPv1.
To access SNMP v1/v2c:
1. In CentreWare Internet Services, click Properties > Protocols.
2. Click SNMP.
Click Configure SNMP v1/v2c.
3.
To configure SNMP v1/v2c community names:
1. For community names, type each name.
2. Click Apply.
Note: Changes made to the GET or SET community names for this printer require corresponding
changes to the GET or SET community names for applications using SNMP.
To configure SNMP v1/v2c traps:
Click Configure Traps.
1.
2. To edit or delete a trap, click Edit or Delete. To add a trap address, click Add Destination.
3. For Trap Destination Address, type an IP address.
4. For DNS Name, type a domain name.
5. Type the UDP Port Number.
6. For SNMP Version, select the trap version for the specified address.
7. For Traps Community Name, type the name of the destination device.
8. For Traps to be received, for at least one trap, select the corresponding check box.
9. Click Apply.
®
Xerox ColorQube 8580/8880 Color Printer
System Administrator Guide
Network Connectivity
37