Snmp Settings - Xerox Phaser 5335 User Manual

[SNMP Settings]

Set this when using the SNMP port. SNMP must be used when managing multiple printers
remotely with an application. SNMP manages printer information and provides it to the
application.
Setting Item
Port Status
88
5 Control Panel Menus
Network / Port
SNMP Settings
Sets whether to enable or disable the SNMP port at printer start-up.
If you selected [Enable], select also UDP or IPX.
• [Enable] (default)
• [Disable]
Note
• When using UDP protocol, both the printer and client computers must have
IP addresses.
• [SNMP IPX] appears only when the network expansion card (optional) is
installed.
• To determine which protocol (UDP or IPX) to use, refer to the manual
supplied for the application.
• After changing this setting, reboot the printer.
SNMP Settings
Port Status
Description
Port Status
SNMP UDP
Port Status
SNMP IPX