Efi/Posse Commands; Help - HP Integrity rx2620 User's & Service Manual

Utilities

EFI/POSSE Commands

Table C-1 EFI Commands (Continued)
EFI Shell
Command
errdump cmc
errdump init
EFI/POSSE Commands
This section describes the EFI/POSSE commands developed for the server.
EFI and Pre-OS System Environment (POSSE) are similar. EFI is an Intel specification,
NOTE
whereas POSSE is the HP implementation that aids HP support.

help

Provides information on the EFI shell commands. It also has an additional feature to aid those familiar with
the BCH menus of PA-RISC servers to adjust to their equivalent functions in EFI.
Syntax
help [-b] <category>
help [-b] <cmd>
help [-b] bch <bchmenu> <bchcmd>
Parameters
-b Enable page breaking
category Category of commands to view help on commands
cmd Shell command name on which to provide verbose information
bch Display the list of BCH commands and their corresponding EFI
bchmenu BCH menu name taken from the top level of the BCH menu
bchcmd BCH command on which to display information
Operation
If help is initiated with no parameters, it displays a list of shell command categories. To list all of the
commands within a category, the user should type help <category> (see examples). If initiated with the -b
switch, any output longer than one page pauses after each page is displayed. If a shell command name is used
as a parameter, verbose help is displayed for that command.
If help is initiated with the bch option, it displays a list of BCH commands and their corresponding
EFI/POSSE commands. It instructs the user to repeat the command line followed by a menu name for more
information on that menu. If help is initiated followed by bch and a menu name, it displays a list of
commands that appear under that BCH menu. The user may then initiate help followed by bch, the menu
172
BCH
Command
Equivalent
(PA-RISC)
processor [<proc>] [HPMC|LPMC|TOC|ASIC]]
internal
memory (PIM)
BCH Command Parameters
(PA-RISC)
Definition
Display PIM information
Appendix C