Done By End User - MUTOH ValueJet 1608 HS User Manual

User's Guide ValueJet 1608 HS
Periodical maintenance
6.1

Done by end user

Caution
The periodical maintenance ensures stable printout quality of the machine.
Perform periodical inspections according to the table below.
Note
Note
136
Downloaded From ManualsPrinter.com Manuals
Be sure to wear gloves when working with inks or cleaning liquid.

In case of working with other inks than described in this manual, refer to the

instruction sheet enclosed with the ink to know the periodical maintenance and
its frequency.
N°
1
Clean the wiper + soak the head cap
Clean gap between print head and guide ramps +
2
nozzle plate edges daily
3 Check for condensated water and drain if needed
4 Shaking the ink bags
5 Clean media guide platen
6 Replacing the right spitting box sponge
7
Replacing the left spitting box sponge
8
Clean timing fences
9
Clean P-REAR sensor front surface
10
Clean pressure rollers
Do not insert or drop metal or other objects through openings of the printer. It

could lead to an electric shock and / or fire.
When substances or liquids such as water entered the printer, do NOT use the

printer. It could lead to an electric shock and/or fire. Immediately
Switch OFF the printer.

Disconnect the power plugs from the electric sockets.

Contact your local Mutoh dealer.

The accessory kit, delivered with the printer, contains items to perform the

periodical maintenance (except for cleaning liquid)
If running out of the necessary maintenance equipment, a user maintenance kit

can be ordered. This kit contains all items to perform the periodical
maintenance.
Depending on the ink you are currently using, order the correct cleaning liquid.

Action Frequency
Once a day
Once a day
Once a week
Once a week
Once a month
Once a month
Every 6 months
Several times a year
Several times a year
Several times a year
AP-75810 - Revision 2.0