Periodical Maintenance; Done By End User - MUTOH Rockhopper 3 Extreme Operation Instructions Manual

4.1 DONE BY END USER

This section describes the periodical services required for this machine. The periodical services ensure
stable printout quality of the machine. In the periodical services, some service parts may be checked,
cleaned, or replaced.
Perform periodical inspections according to the table below.
No° Action
1 Cleaning the edges of the caps and the area around the caps.
2 Cleaning around the bottom of the heads.
3 Cleaning the wipers.
4 Replacing the wipers.
5 Replacing the sponge in the spitting box.
6 Change the upper sponge at the back of the capping station.
Notes
•
All cleaning in "Ink areas" must be done with Eco-Solvent Ultra cleaning.
•
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Available kits for the end user and their order numbers
1. User and good shape kit for 6 months
No Description
Sponge plate
1
Wipers
2
Spitting box sponge
3
Cleaning Liquid 250 ml
4
Instruction sheet
5
Good shape kit
6
2. Good shape kit
No Description
Gloves
1
Pipette
2
Swabs
3
Polyknit wiper
4

4 PERIODICAL MAINTENANCE

Maintenance cycles
Operation Instructions Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
KY-80300
Quantity
1
24
6
2
1
1
KY-80305
Quantity
100
20
50
300
35
Frequency
Weekly
Weekly
2 weekly
Monthly
Monthly
6 Monthly
AP-77150 – Rev. 1.1 – 05/04/07