Installing The Aileron Linkage - Seagull Models SEA FURY Assembly Manual

SEA FURY.
Attach the thread to the servo lead and
carefully thread it though the wing. Once you
have thread the lead throught the wing, remove
the string so it can use for the other servo
lead. Tape the servo lead to the wing to prevent
it from falling back into the wing.
Thread.
Top side.
Electric wire.
Plastic tape.
Instruction Manual.
! 3) Install the aileron servo mount into the
wing, with the output shaft towards the lead-
ing edge of the wing.
Repeat the procedure for the other wing
half.
AILERON LINKAGE.

INSTALLING THE AILERON LINKAGE.

! 1) Using a ruler & pen to draw a straight
line as below picture.
Pen.
Straight line.
15