Seagull Models SEA FURY Assembly Manual page 10

SEA FURY.
Cut.
Sanding.
INSTALLING THE FLAP SERVO.
Servos.
We recommended to use long servos
arm for all servos without throttle
servo.
! 1) Install the rubber grommets and brass
collets onto the flap servo. Test fit the servo
into the flap servo mount.
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
! 2) Secure the servos with the screws pro-
vided from your radio system.
10
Small weight.
Thread.
Instruction Manual.
Using a small weight (
) and thread, feed the string through
works well
the wing as indicated.
Small weight.
Electric wire.
Attach a servo lead to the flap servo. Attach
the string to the servo lead and carefully thread
it though the wing. Once you have thread the
lead throught the wing, remove the string so it
can use for the other servo lead. Tape the servo
lead to the wing to prevent it from falling back
into the wing.
Weighted fuel pick-up
Thread.
Wing bottom.