Seagull Models SEA FURY Assembly Manual page 11

SEA FURY.
!
3) Install the flap servo mount into the
wing, with the output shaft towards the lead-
ing edge of the wing.
Repeat the procedure for the other wing
half.
Electric wire.
Plastic tape.
Instruction Manual.
INSTALLING THE FLAP SERVO
CONTROL HORN.
! 1) Put the flap in flap mount.
! 2) Using a ruler & pen to draw a straight
line as pictures below.
Pen.
Straight line.
12mm.
Flap mount.
Flap.
11