Table of Contents
Advertisement
DHCP Gen-Options, Option Groups, and Option Filtersets Commands
DHCP Gen-Options commands
ip dhcp gen-option tag option 1..255 [ data-type { ascii | hex | dotted-decimal } ] [ data data ]
ip dhcp gen-option tag data-type { ascii | hex | dotted-decimal }
ip dhcp gen-option tag data { data_of_the_correct_format_given_data-type }
ip dhcp gen-option tag priority { low | high }
show ip dhcp gen-option tag priority { low | high }
no ip dhcp gen-option tag
ip dhcp gen-option tag option 1..255 [ data-type { ascii | hex | dotted-decimal } ] [ data data ]
This command allows you to specify a DHCP generic option set specified by tag of one to 15 characters. You
can specify up to 20 gen-options. Each can contain up to 100 bytes of data, up to a maximum of 912 bytes of
options data total, although, in practical terms, the CLI's 80-character limit will restrict it to fewer. An option
specified by a gen-option will be served only if the client requests it.
The following table shows the formats and sizes for known options, and whether or not you can configure a
gen-option of that type.
Option
0
1
2
3 - 11
12
13
14 - 15
16
17
18
19 - 20
21
22
DHCP Gen-Options commands
Data Format
Empty
IP mask
Unsigned 4 byte integer
IP address list
String (up to 100 characters)
Unsigned 2 byte integer
String (up to 100 characters)
Unsigned 4 byte integer
String (up to 100 characters)
String (up to 100 characters)
Flag
IP address & mask list
Unsigned 2 byte integer
Motorola Netopia® Router CLI Commands 2-77
Data Size
Can
(bytes)
Configure
0
No
4
Yes
4
Yes
Multiples of 4
Yes
N
Yes
2
Yes
N
Yes
4
Yes
N
Yes
N
Yes
1
Yes
Multiples of 8
Yes
2
Yes
Advertisement
Table of Contents
