Table of Contents
Advertisement
interface ethernet id [ yes | no ]
This command allows you to create or delete an additional LAN (ALAN) of id id. If you create an ALAN, you must
provision it with the same parameters that apply to the primary LAN.
Example:
interface ethernet 2 yes
interface ethernet 2 tag "Telecommuter"
interface ethernet 2 enable yes
interface ethernet 2 ip address 3.0.0.1/8
interface ethernet 2 ip rip receive both
interface ethernet 2 ip rip transmit no
interface ethernet 2 ip multicast-fwd no
interface ethernet 2 address-serve enable no
interface ethernet 2 address-serve clients none
interface ethernet 2 address-serve dhcp lease-time 1
interface ethernet 2 address-serve gateway default 3.0.0.1/8
interface ethernet 2 address-serve mode server
interface ethernet 2 address-serve netbios mode enable no
interface ethernet 2 address-serve netbios mode type b-node
interface ethernet 2 address-serve netbios scope enable no
interface ethernet 2 address-serve netbios name-server enable no
interface ethernet 2 address-serve netbios name-server address 0.0.0.0
interface ethernet 2 address-serve range 3.0.0.100 3.0.0.199
interface ethernet 2 mac address 00:00:c5:fa:dd:04
Motorola Netopia® Router CLI Commands 2-17
Advertisement
Table of Contents
