Table of Contents
Advertisement
show history
This command displays the command history buffer, which contains a record of the commands that have been
entered on the console. The list is limited to the most recent ten commands entered. The oldest command
appears first, and the most recent command appears last.
show memory
This command displays the system memory status.
Example:
#show memory
Memory status:
Heap: total bytes 7936960 (free 4437424, allocated 3499536)
System Packet Buffers: total 1000 free 993 min 992
Image usage: text 3931180, data 536336, bss 370412
Heap status: peak usage 3520512, lowest free 4416448, fragments 6
show model
This command displays the device's model number.
Example:
#show model
Netopia R7200 Router
show system information
This command shows the same information as is shown in the System Information screen in the console menu
user interface:
■
Serial Number
■
Firmware Version
■
Processor Speed (MHz)
■
Flash ROM Capacity (MBytes)
■
DRAM Capacity (MBytes)
■
Ethernet
■
WAN Interface
Motorola Netopia® Router CLI Commands 2-107
Advertisement
Table of Contents
