T1 Wan Interface Configuration Commands - Netopia CLI 874 Cli Reference Manual

2-62 Command Line Interface Commands Reference
T1 WAN Interface configuration commands
interface t1 id buildout { auto | 0-0.6 | 7.5 | 15.0 | 22.5 }
show interface t1 id buildout
interface t1 id channels
count integer
[ start integer ]
[ { alternating | contiguous } ]
[ rate { 56 | 64 | 56k | 64k | Nx56k | Nx64k } ]
show interface t1 id channels
interface t1 id clock source { internal | network }
show interface t1 id clock source
interface t1 id dle { ppp | hdlc | rfc1490 }
show interface t1 id dle
interface t1 id ds0-autodetect { yes | no }
show interface t1 id ds0-autodetect
no interface t1 id ds0-autodetect
interface t1 id framing { d4 | esf }
show interface t1 id framing
interface t1 id encoding { ami | b8zs }
show interface t1 id encoding
interface t1 id operation line type { normal | copper-mountain }
show interface t1 id operation line type
interface t1 id prm-enable { yes | no }
show interface t1 id prm-enable
no interface t1 id prm-enable
interface t1 id rfc1973 enable { yes | no }
show interface t1 id rfc1973 enable
no interface t1 id rfc1973 enable
T1 WAN Interface Configuration Commands