Compuserve Login - Netopia CLI 874 Cli Reference Manual

3-24 Command Line Interface Commands Reference
cp { name | index } gre checksum [ yes | no ]
show cp { name | index } gre checksum [ yes | no ]
These commands allow you to enable, disable, or show whether a GRE tunnel will transmit a checksum field on
outgoing GRE packets, when enabled. The Router will implicitly check incoming GRE packets with a checksum
value.
cp { name | index } gre sequence-datagrams [ yes | no ]
show cp { name | index } gre sequence-datagrams [ yes | no ]
These commands allow you to enable, disable, or show whether a GRE tunnel will transmit sequence numbers
on outgoing GRE packets, when enabled. Also specifies that the GRE tunnel will check an incoming GRE
packet's sequence number field for out-of-sequence ordering and buffering. When disabled, the CPE will not
send sequence numbers; and it will consider all inbound packets to be in-sequence (i.e. not check the "S" bit
flag, if set).
cp { name | index } gre key [ 0..232-1 ]
show cp { name | index } gre key [ 0..232-1 ]
These commands allow you to specify or show a 32-bit integer key value assigned to the GRE tunnel; if zero,
the tunnel is considered not to have a key identifier. It will not set the "K" bit in the GRE header, and ignore any
key value received from the peer. If non-zero, the received key field value (if present in the GRE header) will be
checked against the local tunnel value, and discarded if the comparison fails. If non-zero, all outbound GRE
headers will include this value in the Key Field.

CompuServe Login

cp { name | index } telco compuserve login { yes | no }
show cp { name | index } telco compuserve login
no cp { name | index } telco compuserve login
cp { name | index } telco compuserve hostname string
show cp { name | index } telco compuserve hostname
no cp { name | index } telco compuserve hostname
cp { name | index } telco compuserve username string
show cp { name | index } telco compuserve username
no cp { name | index } telco compuserve username
cp { name | index } telco compuserve password string
no cp { name | index } telco compuserve password
CompuServe Login Connection Profile Commands