Table of Contents
Advertisement
Motorola Netopia® Router Text Configuration Upload 4-3
Example Text Configuration File
The following text file is provided for your use as an example. Make your own appropriate substitutions.
Note: All commands, including the last, must be followed by an appropriate end-of-line sequence (Carriage
Return, Line Feed, or Carriage Return/Line Feed pair).
;Example config file
;LAN configuration
;set ethernet address
interface ethernet 0 ip address 163.176.227.1/24
;set a secondary ethernet address
interface ethernet 0 ip address 163.176.254.1/24 secondary
;set default gateway to 163.176.224.1
ip gateway 163.176.224.1
;set Rx and Tx RIP
interface ethernet 0 ip rip receive both
interface ethernet 0 ip rip transmit v1
;set dns 1 and dns 2
ip dns 1 163.176.4.10
ip dns 2 163.176.4.31
;set domain name
ip domain-name netopia.com
;configure IP address serving to serve 100 addresses off the 163.176.227.0/24 subnet
ip address-serve 163.176.227.101 163.176.227.201 dhcp
ip address-serve mode server
;other possible commands include:
;interface wan 1 dle ppp
;interface wan 1 dle rfc1483
;user mysecurname mysecurpass
;WAN configuration
;instantiate profile 1 with name "My ISP" and DLE type RFC1483
cp 1
cp 1 tag "My ISP"
;set up profile addressing
cp 1 ip address local 163.176.224.2
;other possible commands include:
;cp 2
;cp 16
;cp 1 ip nat enabled no
Advertisement
Table of Contents
