Netopia CLI 874 Cli Reference Manual page 22

2-10 Command Line Interface Commands Reference
These commands allow you to enable, disable, or show the status of logging of system events for reporting by
a Syslog client. By default, all events are logged in the event history. By using the syslog commands that follow
to set each event descriptor to either yes or no, you can determine which ones are logged and which are
ignored.
system syslog host-name hostname
no system syslog host-name
show system syslog host-name
Note:
These commands are supported beginning with Firmware Version 8.2.
These commands allow you to specify, disable, or show the status of the syslog server's address either in
dotted decimal format or as a DNS name up to 64 characters.
system syslog facility facility
show system syslog facility
Note:
These commands are supported beginning with Firmware Version 8.2.
These commands allow you to specify or show the UNIX syslog Facility. facility values may be "local0" through
"local7".
system syslog log-violations { yes | no }
no system syslog log-violations
show system syslog log-violations
Note:
These commands are supported beginning with Firmware Version 8.2.
These commands allow you to enable, disable, or show whether violations are logged or ignored.
system syslog log-accepts { yes | no }
no system syslog log-accepts
show system syslog log-accepts
Note:
These commands are supported beginning with Firmware Version 8.2.
These commands allow you to enable, disable, or show whether acceptances are logged or ignored.
system syslog log-attempts { yes | no }
no system syslog log-attempts
show system syslog log-attempts
Note:
These commands are supported beginning with Firmware Version 8.2.
These commands allow you to enable, disable, or show whether connection attempts are logged or ignored.