Netopia 3366-ENT Getting Started Manual
  1. Manuals
  2. Brands
  3. Netopia Manuals
  4. Network Router
  5. 3366-ENT
  6. Getting started manual

Netopia 3366-ENT Getting Started Manual

Adsl router with v.92 backup
Hide thumbs Also See for 3366-ENT:
Table of Contents

Advertisement

Quick Links

®
Netopia
3366-ENT
ADSL Router with V.92 Backup
Getting Started Guide

Advertisement

Table of Contents
loading

Related Manuals for Netopia 3366-ENT

Summary of Contents for Netopia 3366-ENT

  • Page 1 ® Netopia 3366-ENT ADSL Router with V.92 Backup Getting Started Guide...
  • Page 2 This manual and any associated artwork, software, and product designs are copyrighted with all rights reserved. Under the copyright laws such materials may not be copied, in whole or part, without the prior written consent of Netopia, Inc. Under the law, copying includes translation to another language or format.

  • Page 3: Table Of Contents

    Important Safety Instructions ... 2-2 POWER SUPPLY INSTALLATION ... 2-2 Identify the Connectors and Attach the Cables ... 2-3 Netopia 3366-ENT ADSL Router with V.92 Backup Status Lights ... 2-5 Readying Computers on Your Local Network... 3-1 Connecting to an Ethernet Network ... 3-2 Configuring TCP/IP on Windows-based Computers...
  • Page 4 Getting Started Guide 4. Easy Setup Security Configuration ... 6-7 Chapter 7 — Line Backup ...7-1 Configuring Backup ... 7-1 Connection Profiles ... 7-2 IP Setup ... 7-7 WAN Configuration ... 7-8 Backup Configuration screen... 7-10 Using Scheduled Connections with Backup ... 7-13 Backup Default Gateway...

  • Page 5: Chapter 1 - Introduction

    I I I I n n n n t t t t r r r r o o o o d d d d u u u u c c c c t t t t i i i i o o o o n n n n Overview The Netopia 3366-ENT ADSL Router with V.92 Backup is a full-featured ADSL router for connecting diverse local area networks (LANs) to the Internet and other remote networks. The Netopia 3366-ENT ADSL Router with V.92 Backup connects easily to your DSL line to provide your whole network with a high-speed connection to the outside world.

  • Page 6: How To Use This Guide

    3-hole punched paper, so that you can put the pages in a binder for future reference. This guide is organized into chapters describing the Netopia 3366-ENT’s advanced features. You may want to read each chapter’s introductory section to familiarize yourself with the various features available.

  • Page 7: Chapter 2 — Making The Physical Connections

    M M M M a a a a k k k k i i i i n n n n g g g g t t t t h h h h e e e e P P P P h h h h y y y y s s s s i i i i c c c c a a a a l l l l C C C C o o o o n n n n n n n n e e e e c c c c t t t t i i i i o o o o n n n n s s s s This section tells you how to make the physical connections to your Netopia 3366-ENT ADSL Router with V.92 Backup.

  • Page 8: Important Safety Instructions

    You will need: • A Windows–based PC or a Macintosh computer with Ethernet connectivity for configuring the Netopia 3366-ENT. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See “Configuring TCP/IP” on page • A phone jack to which your ADSL provider is providing ADSL service. (Your phones and ADSL service generally use the same phone line.)

  • Page 9: Identify The Connectors And Attach The Cables

    Identify the Connectors and Attach the Cables Identify the connectors on the back panel and attach the necessary Netopia Router cables. Netopia 3366-ENT back panel DSL port Port DSL port An RJ-11 jack labeled DSL to connect to your ADSL wall jack.
  • Page 10 Connect the supplied power brick to a power outlet and the connector end to the router. You should now have: the power adapter plugged in; the Ethernet cable connected between the router and your computer; and the telephone cable connected to its appropriate wall jack.

  • Page 11: Netopia 3366-Ent Adsl Router With V.92 Backup Status Lights

    Netopia 3366-ENT ADSL Router with V.92 Backup Status Lights The figure below represents the Netopia 3366-ENT status light (LED) panel. Netopia 3366-ENT status indicator lights Making the Physical Connections 2-5 Power: Solid green when the power is on Flashes for firmware upgrade...
  • Page 12 2-6 Getting Started Guide...

  • Page 13: Chapter 3 — Connecting To Your Local Area Network

    C C C C o o o o n n n n n n n n e e e e c c c c t t t t i i i i n n n n g g g g t t t t o o o o Y Y Y Y o o o o u u u u r r r r L L L L o o o o c c c c a a a a l l l l A A A A r r r r e e e e a a a a N N N N e e e e t t t t w w w w o o o o r r r r k k k k This chapter describes how to physically connect the Netopia 3366-ENT to your local area network (LAN). Before you proceed, make sure the Netopia 3366-ENT is properly configured.

  • Page 14: Connecting To An Ethernet Network

    Internet or other remote IP networks. Connecting to an Ethernet Network You can connect a standard 10/100Base-T Ethernet network to the Netopia 3366-ENT using any of its Ethernet ports.
  • Page 15 If you add devices connected through a hub or switch, connect the hub or switch to an Ethernet port on the Netopia 3366-ENT. The Netopia 3366-ENT in a 10/100Base-T network To connect your 10/100Base-T network to the Netopia 3366-ENT through an Ethernet port, use standard Category 5 Ethernet cables with RJ-45 connectors.
  • Page 16 3-4 Getting Started Guide...

  • Page 17: Chapter 4 - Configuring Tcp/Ip

    Once you have set up your physical local area network, you will need to configure Internet Protocol (TCP/IP) on each client workstation connected to your Netopia 3366-ENT. This chapter describes how to configure TCP/IP for both Windows-based and Macintosh computers.
  • Page 18 Step 4. Remove any previously configured Gateways, if available. Step 5. OK the settings. Restart if prompted. NOTE: You can also use these instructions to configure other computers on your network to accept IP addresses served by the Netopia 3366-ENT.

  • Page 19: Configuring Tcp/Ip On Macintosh Computers

    Configuring TCP/IP on Macintosh Computers The following is a quick guide to configuring TCP/IP for MacOS computers. Configuring TCP/IP in a Macintosh computer requires the following: • You must have Open Transport installed, standard in MacOS 8 and higher and optional in earlier system versions.
  • Page 20 4-4 Getting Started Guide Step 3. Select Configure Using DHCP Step 4. Close and Save, if prompted. NOTE: You can use these instructions to configure other computers on your network to accept IP addresses served by the Netopia 3366-ENT.

  • Page 21: Chapter 5 - Telnet-Based Management

    T T T T e e e e l l l l n n n n e e e e t t t t - - - - B B B B a a a a s s s s e e e e d d d d M M M M a a a a n n n n a a a a g g g g e e e e m m m m e e e e n n n n t t t t Telnet-based management is a menu-driven interface for the capabilities built into the Netopia 3366-ENT.

  • Page 22: Connecting Through A Telnet Session

    5-2 Getting Started Guide reconfiguring the manner in which you may be using the router to connect to more than one service provider or remote site. • The System Configuration menus display and permit changing: • IP Setup • Filter Sets •...

  • Page 23: Navigating Through The Telnet Screens

    If you connect a Macintosh computer running Classic Mac OS, you can use the NCSA Telnet program supplied on the Netopia CD. You install NCSA Telnet by dragging the application from the CD to your hard disk. Mac OS X users can use the Terminal application that comes with Mac OS X in the Utilities folder.
  • Page 24 5-4 Getting Started Guide...

  • Page 25: Chapter 6 - Easy Setup

    E E E E a a a a s s s s y y y y S S S S e e e e t t t t u u u u p p p p This chapter describes how to use the Easy Setup Telnet screens on your Netopia 3366-ENT. After completing the Easy Setup Telnet screens, your router will be ready to connect to the Internet or another remote site.

  • Page 26: Quick Easy Setup Connection Path

    6-2 Getting Started Guide Quick Easy Setup Connection Path This section may be all you need to do to configure your Netopia 3366-ENT ADSL Router with V.92 Backup. Your service provider will supply you with several parameter values. Below is a handy checklist: ❑...
  • Page 27 The Main Menu appears. If you do not see the Main Menu, verify that: • The computer used to view the Telnet screen has an Ethernet connection to the Netopia 3366-ENT’s Ethernet port. See “Connecting through a Telnet Session” on page •...

  • Page 28: Adsl Line Configuration

    The Wiring Type pop-up menu allows you to choose the type of copper pair wiring in use at your location. The Router is preset to AutoSense, so that it will try both common types automatically, without any adapters required. You can choose your own type, if you know it. Tip/Ring (Inner Pair) is the most common type.

  • Page 29: Easy Setup Profile

    The Easy Setup Profile screen is where you configure the parameters that control the Netopia 3366-ENT’s connection to a specific remote destination, usually your ISP or a corporate site. On a Netopia 3366-ENT you can add up to 15 more connection profiles, for a total of 16, although you can only use one at a time, unless you are using Virtual Private Networks (VPNs).

  • Page 30: Ip Easy Setup

    Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given you only if you are not using Network Address Translation (NAT). This will be the Netopia Router’s IP address. The Ethernet IP Address defaults to an address (192.168.1.1) within a range reserved by the Internet address administration authority for use within private networks.

  • Page 31: Easy Setup Security Configuration

    If you do not enter a Default IP Gateway value, the router defaults to the remote IP address you entered in the Easy Setup connection profile. If the Netopia Router does not recognize the destination of any IP traffic, it forwards that traffic to this gateway.
  • Page 32 PREVIOUS SCREEN Configure a Configuration Access Name and Password here. The final step in configuring the Easy Setup Telnet screens is to restart the Netopia 3366-ENT, so that the configuration settings take effect. Select RESTART DEVICE. A prompt asks you to confirm your choice.

  • Page 33: Configuring Backup

    L L L L i i i i n n n n e e e e B B B B a a a a c c c c k k k k u u u u p p p p The Netopia 3366-ENT offers line backup functionality in the event of a line failure on the DSL primary WAN link: •...

  • Page 34: Connection Profiles

    7-2 Getting Started Guide Detailed descriptions follow. Connection Profiles The dial backup feature allows you to configure a complete Connection Profile for the modem backup, just as you do for your primary WAN connection. In this way profiles are associated with a particular interface. It should have switched characteristics for modem backup.
  • Page 35 Profile Name: Profile Enabled: Encapsulation Type... Encapsulation Options... IP Profile Parameters... COMMIT Assuming you selected PPP, new fields appear. Profile Name: Profile Enabled: Encapsulation Type... Encapsulation Options... IP Profile Parameters... Interface Group... Telco Options... COMMIT Underlying Encapsulation and PPP Mode do not usually need to be changed for a PPP connection. •...
  • Page 36 7-4 Getting Started Guide The Datalink (PPP/MP) Options screen appears. Data Compression... Send Authentication... Send User Name: Send Password: Receive User Name: Receive Password: Dial on Demand: Maximum Packet Size: PAP-- Password protection is used. • Data Compression should remain set to Standard LZS. •...
  • Page 37 • Select IP Profile Parameters. The IP Profile Parameters screen appears. Address Translation Enabled: IP Addressing... NAT Map List... NAT Server List... NAT Options... Stateful Inspection Enabled: Local WAN IP Address: Remote IP Address: Remote IP Mask: Filter Set... Remove Filter Set RIP Profile Options...
  • Page 38 You can add the Number to Dial and an Alternate Site to Dial, if available. • You can toggle Dial on Demand to Yes or No. This allows the router to determine whether or not to dial the backup number when there is traffic that needs to be transmitted or received.

  • Page 39: Ip Setup

    Rip Options... Multicast Forwarding... Static Routes... Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx). Set up the basic IP attributes of your Netopia in this screen. • Set Backup IP Gateway to 127.0.0.2. • Set Secondary Domain Name Server to the IP Address DNS of your dial-up ISP.

  • Page 40: Wan Configuration

    7-8 Getting Started Guide WAN Configuration To configure the modem characteristics, from the Main Menu select WAN Configuration and then WAN Setup. Main Menu Return/Enter to create a new Connection Profile. From here you will configure yours and the remote sites' WAN information. The Choose Interface to Configure screen appears.
  • Page 41 Choose the interface to configure for backup, MODEM (Wan Module 2) Setup. The Internal Modem Setup screen appears. Modem Dialing Prefix: PBX Dialing Prefix: Line Directory Number: Speaker On... Speaker Volume... Answer Incoming calls... Country... Enter the dialing prefix to be sent to all modems. •...

  • Page 42: Backup Configuration Screen

    • Select Ping Host Name or IP Address and enter an IP address or resolvable DNS name that the router will ping. This is an optional item that is particularly useful for testing if the remote end of a VPN connection has gone down.
  • Page 43 Layer 3. Note: If you want the router to initiate the backup connection on loss of Layer 1 or 2 only (Physical or Data link Layer), leave Ping Host Name or IP Address blank. Do not use 0.0.0.0 in this field. Hit the space bar or Delete key to CLEAR the field totally.
  • Page 44 The Layer 2 Failure Timer specifies the amount of time the router spends determining whether layer 2 is up on the primary interface. For instance, if you set the Layer 2 Failure Timer to 30 seconds, the router, when it tears down the backup connection to check the primary, will spend 30 seconds in primary mode, checking to see if layer 2 is up.

  • Page 45: Using Scheduled Connections With Backup

    Using Scheduled Connections with Backup The backup link is a PPP dial-up connection and only connects to the Internet service provider when traffic is initiated from the LAN. If you want to use the backup link to provide redundancy for services, such as a Web service that you provide to the outside world, you must force the connection to stay up.
  • Page 46 7-14 Getting Started Guide Scheduled Connection Enable: How Often... Schedule Type... Set Weekly Schedule... Use Connection Profile... ADD SCHEDULED CONNECTION Return/Enter accepts * Tab toggles * ESC cancels. Scheduled Connections dial remote Networks on a Weekly or Once-Only basis. • Toggle Scheduled Connection Enable to On.

  • Page 47: Backup Default Gateway

    For more information about Scheduled Connections, see the Firmware User’s Guide. Backup Default Gateway If you do not want to use the internal modem for backup, the Netopia 3366-ENT offers backup functionality to an alternate gateway typically connected to a LAN port.
  • Page 48 Multicast Forwarding... Static Routes... Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx). Set up the basic IP attributes of your Netopia in this screen. For information about the Backup Default Gateway option, see the Firmware User’s Guide. IP Setup 192.168.1.1...

  • Page 49: Chapter 8 - Technical Specifications And Safety Information

    Dimensions: 7.5” (19.5 cm) (w) x 6.75” (17 cm) (d) x 1.5" (3.5 cm) (h) Communications interfaces: The Netopia 3366-ENT ADSL Router with V.92 Backup has an RJ-11 jack for WAN line connections and a 4–port 10/100Base-T Ethernet switch for your LAN connections.

  • Page 50: Agency Approvals

    EN300 386 V1.2.1 Regulatory notices European Community. This Netopia product conforms to the European Community CE Mark standard for the design and manufacturing of information technology equipment. This standard covers a broad area of product design, including RF emissions and immunity from electrical disturbances.

  • Page 51: Manufacturer's Declaration Of Conformance

    It is the responsibility of users requiring service to report the need for service to our Company or to one of our authorized agents. Service can be obtained at Netopia, Inc., 6001 Shellmound Street, Emeryville, California, 94608. Telephone: 510-597-5400. Note: Important This product was tested for FCC compliance under conditions that included the use of shielded cables and connectors between system components.

  • Page 52: Important Safety Instructions

    8-4 Getting Started Guide Repairs to the certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

  • Page 53: Fcc Part 68 Information

    If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this Netopia 3300 Series router does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or qualified installer.

  • Page 54: Electrical Safety Advisory

    8-6 Getting Started Guide Electrical Safety Advisory Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. Therefore it is advised that this equipment be connected to AC power through the use of a surge arrestor or similar protection device.

Table of Contents