Table of Contents
Advertisement
Example:
#show wireless statistics
Wireless Statistics
Wireless Protocol:
Wireless MAC Addr:
Network ID (SSID):
Operating Channel:
Transmit OK
Receive OK
Tx Errors
Rx Errors
Rx No Message
Rx Octets
Rx Unicast Pkts
Rx Multicast Pkts
Tx Discards
Tx Octets
Tx Unicast Pkts
Tx Multicast Pkts
802.11g Chipset:
RX Frames:
TX Frames:
Free MSDU:
Free BD:
# Out of Packets:
# TX Queue Full:
wireless default-channel [ no 1..14 ]
show wireless default-channel
These commands allow you to specify or show a frequency range within the 2.4Ghz band on which this wireless
network will operate. Channel selection depends on government-regulated radio frequencies that vary from
region to region. The widest range available is from 1 – 14; in North America, however, only 1 to 11 may be
selected. Channel selection can have a significant impact on performance, depending on other wireless activity
in proximity to this access point. Channel selection is not necessary at the clients; clients will scan the
available channels and look for access points using the same SSID as the client.
IEEE 802.11b/g
00-00-c5-ca-59-94
6245 4521
(Open, No privacy)
6
: 16
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 5326
: 0
: 0
Texas Instruments TNETW-1130
0
0
170
of 170
MSDU Free Watermark:
340 of 340
BD
0
# Out of BDs:
0
Motorola Netopia® Router CLI Commands 2-89
Free Watermark:
0
166
336
Advertisement
Table of Contents
