Table of Contents
Advertisement
ip ntp period value
no ip ntp period
show ip ntp period
Note:
These commands are supported beginning with Firmware Version 8.3.3.
These commands allow you to set, disable, or display the setting of a Network Time Protocol (NTP) server's NTP
Update Interval for the router. The value should be entered in HHHH:MM format.
ip ntp servers ip-addr1 ip-addr2
no ip ntp servers
show ip ntp servers
Note:
These commands are supported beginning with Firmware Version 8.3.3.
These commands allow you to set, disable, or display the Host Name or IP Address of a Network Time Protocol
(NTP) server you want to specify for the router. You can also specify an alternate NTP server Host Name or IP
Address, separated by a space.
ip ntp timezone value
no ip ntp timezone
show ip ntp timezone
Note:
These commands are supported beginning with Firmware Version 8.3.3.
These commands allow you to set, disable, or display your time zone. You can specify the time zone as + or -
Greenwich Mean Time (GMT), or as the standard abbreviation of your zone, if it has one.
For example: GMT -8:00 Pacific Standard Time can be entered as pst. The following table shows some standard
time settings.
GMT -10:00 Hawaii Standard Time
GMT -9:00 Alaska Standard Time
GMT -8:00 Pacific Standard Time
GMT -7:00 Mountain Standard Time
GMT -6:00 Central Standard Time
GMT -5:00 Eastern Standard Time
GMT -4:00 Atlantic Standard Time
GMT -3:30 Newfoundland
GMT -2:00 Mid-Atlantic Time
GMT -1:00 Azores Time
GMT +0:00 Greenwich Mean Time
Motorola Netopia® Router CLI Commands 2-75
GMT +3:30 Tehran
GMT +4:00 Russia Zone 3
GMT +4:30 Kabul
GMT +5:00 Russia Zone 4
GMT +5:30 India
GMT +6:00 Russia Zone 5
GMT +7:00 Russia Zone 6
GMT +8:00 W. Australia Std.
Time
GMT +9:00 Japan Standard Time
GMT +9:30 Adelaide, Darwin
GMT +10:00 E. Aust. Std. Time
Advertisement
Table of Contents
