Table of Contents
Advertisement
As inputs:
•
Use LVTTL (3.3V) levels.
As outputs:
•
- use as an open collector with 100 ohm limiting resistor.
•
- Maximum Sink Current = 50mA for VCE_sat <=0.3V. Maximum VCE = 30VDC
Relay Output Control
Sets the state of the Relay output, Activate means the relay coil is energized and contacts become closed.
Digital Output Control
Those controls are only available when the Digital I/O Select is set to Output. Clicking on "Activate" means that the open
collector transistor is set into conduction (saturation). The transistor can then sink up to 50 mA . Conversely, when it is
deactivated, the transistor stops conducting and the collector is left floating through the internal 18.2 K pull-up resistor
3.11 GPS
The Fusion LTE Cellular Broadband Router contains a standalone, high-accuracy, high-report-rate (12 satellites with WAAS
and Differential Correction, 1 report per second) GPS receiver.
From the main navigation panel, select GPS for access to the screen.
3.11.1 STATUS
Condition
Indicates the quality of received GPS reports
No Fix / Invalid
Standard GPS Fix
The GPS receiver has not yet acquired enough
satellites to provide an accurate position, or the
previous Estimated Position is over 3 minutes
old.
GPS position is reported using no additional
66
Advertisement
Table of Contents
