Table of Contents
Advertisement
3.10 MONITOR & CONTROL
From the main navigation panel, select Monitor & Control for access to the screen.
The FUSION embeds a few discrete analog and digital I/O, some of which can be utilized to obtain local measurements of
voltage or control using relays or discrete digital outputs. Some I/O are monitoring on board physical elements such as
temperature, supply voltage, etc...
These values are available using the SNMP protocol or through the WEB pages.
3.10.1 STATUS
Device Status
Input Voltage
Displays current power supply voltage applied to the unit, in Volts with a precision of ±8%.
Unit Temperature
Displays temperature inside the FUSION enclosure in degree Celsius, precision of approximately ±2°C.
Ignition
Indicates the current state of the Ignition signal
58
Advertisement
Table of Contents
