Power Management - CalAmp Fusion LTE User Manual

3.10.4 POWER MANAGEMENT

The Fusion LTE unit is designed to stay ON even if the ignition is turned off. The unit can be configured to automatically shut
down 1, 5, 30 or 60 minutes after ignition has been turned off or when the supply voltage drops below a certain level
(sometimes called "battery charge guard" feature)
Shutdown Method
Disabled by default; Select "Power off" to enable power management. If disabled, the Fusion will continue to run
indefinitely even without the ignition on.
After Ignition Line Off
Select between the following time intervals: 1, 5, 30 or 60 minutes. The Debounce time serves to avoid false
detection and can be configured to values between 100 ms up to 3.2 seconds. This means that the Ignition must
be stable for at least this amount of time for it to be recognized as OFF.
When Voltage Drops Below
Enter desired voltage. Enter "0" to disable (and give precedence to time delay configured under "After ignition
time off").
63