Table of Contents
Advertisement
Figure 4: Rear Panel Connections
Back panel connectors Left to Right:
I/O: I/O 2 digital inputs / outputs, 2 analog inputs, 2 outputs (relay driven)
Console: USB Device port, used for debug only.
Setup: Pushbutton Reset / Force Factory Settings
Status: Bicolor Status LED
SIM / SVC (left): SIM card slot for module in WAN slot 0
WWAN0: Mini USB Service Port, Direct connection to WWAN0 module, used to change firmware or configure the cellular
modem
SIM / SVC (right): SIM card slot for module in WAN slot 1
WWAN1: Same as WWAN0 except for the module in slot 1
14
Advertisement
Table of Contents
