CalAmp Fusion LTE User Manual page 49

IP Filters
IP Filtering
Enable : IP filtering is enabled. Any custom IP filters entered by the user will be taken into account when processing
IP packets. The predefined IP filters will also be taken into account.
Disable : IP filtering is disabled.
Predefined IP Filters
•
Drop Remote Pings:
Set this to Disabled if you do not want the Fusion to respond to Pings. This can reduce your data usage and
improve security but make debug more difficult.
•
Drop Remote IP Fragments:
In some cases large packets sent by the host will be broken up and sent as fragments to the end device. Enable
this if you want to drop those packets. In most cases this should be left disabled to ensure reliable end to end
communication.
•
Drop Invalid Packets:
Select enabled to force the Fusion to drop any incoming packets that have been determined to be invalid.
Add Custom IP Filter
49