Statistics; Geminig3 (Eth2) - CalAmp Fusion LTE User Manual

Select Dynamic or Static. If you select Dynamic the rest of the entries on this page will be shaded out.
•
IP Address
Static address for this interface, must be on the same subnet as the gateway.
•
Subnet Mask
This will be assigned by the gateway.
•
Gateway
IP address of the Gateway (DHCP host), if not known this can be left as all 0s.
•
DNS Server x
IP address of the DNS server for this unit. If not known, this can be left all 0s.
NAT Configuration
Enable or Disable NAT

3.3.3 STATISTICS

The statistics page lists the total number of packets and bytes transmitted and received since the time the units status
was listed as connected. These numbers reset to 0 when the Ethernet interface disconnects.
3.4

GEMINIG3 (ETH2)

This menu selection replaces the ETH2 LAN setting on Fusions equipped with the narrowband WAN option.
When equipped, this option transforms the ETH2 LAN into a Narrowband WWAN interface by customizing the ETH2
configuration screen to the CalAmp Gemini product line.
Refer to CalAmp part number 001-0001-401 "GEMINI G3 ADB USER MANUAL" for details on the GeminiG3 configuration
31