Table of Contents
Advertisement
DMZ SUPPORT FOR WWAN
DMZ is a host on the internal network that has all ports exposed, except those ports forwarded otherwise.
DMZ
Radio button selection to Enable/Disable; Select Enable to allow the modem to use DMZ routes using the address
set in the Destination IP Address. Select Disable to shut down the DMZ functionality.
Friendly IP Address
Optionally restricts DMZ access to only the specified IP address. If set to "0.0.0.0", the DMZ is open to all incoming
IP Addresses.
Destination IP Address
The IP address which has all ports exposed, except ports defined in the Port Forwarding configuration.
Add Rule
No
Rule number
Protocol
Sets the data protocol as either tcp, udp, or both
Source IP Address
46
Advertisement
Table of Contents
