Administration
Step by Step
38
optiPoint display module
Firmware Update
Firmware cannot be updated if a Java MIDlet is
active (for example, a speed dialing list).
To update your optiPoint display module, perform the
following steps:
1. Make sure that an FTP server is available, see
page 89, and that the relevant firmware file is
stored on the server.
2. Start the Web-Based Management Tool, see
page 42.
3. Select "Administration" > [password] > "File Trans-
fer", see
page 50.
4. Enter the following parameters:
– FTP server address, see
– FTP account name, see
– FTP username, see
– DSM filename, see
5. Select "DSM Filename" from the field "Action on
submit", see
6. Select "Submit".
LDAP Configuration
The following prerequisites must be fulfilled to use the
company telephone directory:
•
An LDAP server is available and the server data has
been entered in the Web-Based Management Tool,
see
page 47.
•
For an example of an LDAP template, see
page 70.
optiPoint display module
page 64
page 64
page 65
page 63
page 58.