Fast!Util Utility; Running The Fast!Util - NEC EXPRESS 320Lb User Manual

Fast!Util Utility

The Fast!Util utility detects the SCSI host adapters on the PCI board and on
option SCSI controller boards. However, the Fast!Util is only used when an
optional SCSI Controller is installed and is used mainly to set the transfer rate of
connected SCSI device.
Use the Fast!Util to:
!
Change default values
!
Check and/or change SCSI device settings that may conflict with those of
other devices in the server

Running the Fast!Util

You access the Fast!Util when you turn on or reboot your system.
To run the Fast!Util utility, perform the following procedure:
1. Power-on or reboot the system.
2. The following message appears on the video monitor:
Press Alt-Q for Fast!Util...
3. Press Ctrl+Q to run this utility. The Fast!Util starts and the Fast!Util
Options Menu is displayed listing the following selections.
4. Highlight Select Host Adapter using the cursor keys and press ENTER.
5. The Select Host Adapter screen is displayed. Select the proper adapter.
Note
is the on-board SCSI host adapter.
6. Highlight one of the displayed Adapter Types with the cursor keys and press
ENTER.
7. The display returns to the Fast!Util Options menu where you can continue to
change the system SCSI configuration parameters. The name of the selected
host adapter is displayed in the upper left-hand corner of the screen.
Fast!Util Options
Menu
Configuration Settings
Scan SCSI Bus
SCSI Disk Utility
Select Host Adapter
Exit Fast!Util
: Do Not select Adapter QLA12160 Ultra3 5800 it
Configuring Your System 3-15