NEC EXPRESS 320Lb User Manual page 57

IMPORTANT:
! Power off the server before connecting peripheral devices, with the exception of
peripherals with USB interface. Connecting a powered peripheral device to the powered
server will cause malfunctions and failures.
!
To connect a third-party peripheral device or interface cable to the server, check with your
sales agent to see if they are compatible with the server. Some third-party devices may
not be used with the server.
!
The total cable length of SCSI device connections is up to 6 m, including the internal
SCSI cables.
! The serial port connectors are reserved for maintenance.
A tower model is shown in the following illustration. However, connections are
the same for a rack-mount model, except that its modules are mounted
horizontally.
IMPORTANT:
However, to place it on a rack-mount model, put a distance of one unit between
the disk drive and the module.
To a SCSI
backup device
To a 1000Mbps
network
To a 100Mbps
network
Display
IMPORTANT:
Connection of optional devices
!
In the standard configuration, complete setup of the operating system before
installing optional PCI cards or hard disks.
2-10 Setting Up the System
Place the USB floppy disk drive on top of the tower cabinet.
USB floppy
disk drive
1
Reserved for
1
maintenance
Reserved for
2
maintenance
Keyboard (via keyboard hub to mouse)