NEC EXPRESS 320Lb User Manual page 34

LED indications Description
Detected a fatal
voltage error.
Amber (blinking Detected a
every 1 second) temperature error
to be warned.
Detected a voltage
error to be warned.
Detected a device
defect.
Detected a fan
alarm.
BMC is being
Red in one module
dumped
PCI module may
be connected
incorrectly.
BMC may be out of
order.
Red in both Both BMCs are out
modules of order.
Red (blinking every Revisions to BMC
1 second) firmware don't
match.
Red (blinking every Transfer of synced
0.5 second) data after a PCI
module is replaced
(this is not an
error).
Action
Contact your sales agent.
If LCD displays some error message, refer to the error
message list (see Chapter 5).
Check if dust is accumulated on internal fans and
confirm that the fan cables are connected firmly. If the
message does not disappear, contact your sales
agent.
Contact your sales agent.
If LCD displays some error message, refer to the error
message list (see Chapter 5).
Check if dust is accumulated on internal fans, and
confirm that the fan cables are connected firmly. If the
message does not disappear, contact your sales
agent.
Wait for a while; it will go off soon.
Check if PCI module is connected correctly. Look for
loose screws.
BMC firmware may need reprogramming. Contact
your sales agent.
Check if both PCI modules are connected correctly.
Look for loose screws. If the message does not
disappear, contact your sales agent.
Contact your sales agent.
Do not loosen a screw on PCI modules or turn off the
AC power before the LED stops blinking.
System Overview 1-17