Installation of Rack-mount Model
IMPORTANT:
Mount the server in a rack that conforms to the EIA standards. To install a rack,
contact your sales agent or maintenance personnel.
To avoid the risk of personal injury, users should not attempt to install the
server into the rack assembly. The server should be installed in the rack only
by trained maintenance personnel.
Room that can maintain the
following conditions during
operation:
Temperature: 10 to 35ºC
Humidity: 20 to 80% (non-
condensing)
100V - 120 V parallel bi-
polar power outlet with
grounding
Level and reinforced
floor.
The server is a precision instrument. Handle with care.
CAUTION
Space 40 cm or more on top, 1 m or more
on the front and rear, and 60 cm or more on
the right and left.
Setting Up the System 2-7