NEC EXPRESS 320Lb User Manual page 155

Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message
0C00
Rompilot reports error number
xx
8600 No working DQS value found
8610 MAC Address update failed –
CoreI/O#010/100Mbit Ethernet COntroller
8611 MAC Address update failed – CoreI/O#0
Gbit Ethernet COntroller
8612 MAC Address update failed –
CoreI/O#110/100 Mbit Ethernet Controller
8613 MAC Address update failed – CoreI/O#1
Gbit Ethernet Controller
5-32 Problem Solving
Description
Configuration error in
SETUP.
CPU/PCI module board is
faulty.
DIMM is faulty
DIMM is not supported
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
FRB2 timeout occurred
when setting MAC address,
and rewrite was
unsuccessful.
Action
Re-configure Rompilot.
Replace the CPU/PCI module
board.
Replace DIMM
Replace DIMM with
appropriate one.
Replace the back panel board.
Replace the PCI module
board.
Replace the back panel board.
Replace the PCI module
board.
Replace the back panel board.
Replace the PCI module
board.
Replace the back panel board.
Replace the PCI module
board.